Instructions(iPhone)

1.Image Printing
Take your image from a digital camera, a scan, or a memory card or designed by yourself, then print it on a piece of A4 sublimation paper or bigger size through inkjet printer.
Note:
   Sublimation ink is crucial;
   Chose mirror printing

iPhone-1

  

 2. Image Cutting
Select your favorite pictures and adjust the printed paper in a proper size.
Note: The size should be a bit larger than the size of the printing sheet. 

 

iPhone-2

 

 3. Blank Printing Sheet Preparation
Tear off the film covering on the printing sheet and present the white coated area.

 

iPhone-3

 

4. Printed Image Fixed
Make sure the printed area fits for the printing sheet. Then, fasten them by thermal tapes.
Note: the side of printing sheet should be covered completely by the printed paper.

iPhone-4

 

5. Printing Process
Fix the blank printing area with printed paper lying on the silicon mat of the flat heat press. Confirm the proper pressure and turn on the press machine by setting the temperature at 180c and time 120s. When the temperature rises up to 180c, pull down the heating board and the sublimation process starts.

iPhone-5 

6. Printed Sheet Finished
When the printing time reaches the end, pull up the heating board and get the printed sheet stuck with paper out of the silicon flat mat. Then remove the paper and your customized image will be found on the sheet.

 

iPhone-6 

7. Printed iPhone Cover Finished
Tear down the sticker on the iPhone cover and put the printed sheet in the correct place to stick on the iPhone cover, then a unique iPhone cover finished.
Note: For protecting the camera of iPhone, the hole on the iPhone cover and sheet should be preserved properly.

iPhone-7