Instructions(IPD03-05)

1.Image Printing
Get your image from digital a camera, a scan, or a memory card or designed by yourself, then print it on A4 sublimation paper or bigger size through inkjet printer.
Note:
    Sublimation ink is crucial;
    Chose mirror printing

iPD03-05-1

2. Printed Image Fixed
Put the printed paper on the area and fix the image and iPad case with thermal tape.
Note:The printed paper should cover the printing area fully, as shown in the following figure.

iPD03-05-2


3. Printing Process
Open the iPad case and fix the blank printing area with printed paper laying on the silicon mat of flat heat press. Confirm the proper pressure and turn on the press machine by setting the temperature at 180c and time 120s. When the temperature rises up to 180c, pull down the heating board and the sublimation process starts.

iPD03-05-3

  

4. Printed iPad Case Finished
When the printing comes to the end, pull up the heating board and you will find the printing paper is yellowed and the outlines of the image rolls up. Then tear off the paper, and the iPad case take on a new look with beautiful pictures on.

iPD03-05-4